Imane DAHMOUN
ASIC Physical Design Engineer
embedded systems
semiconductor
ASIC
Engineer
Physical design
31 ans
Permis de conduire
Kenitra (14070) Maroc
Consultante
Ouverte aux opportunités
ASIC physical design engineer with a 2,5 years’ professional experience in the different steps of the IC design flow, mainly in the backend. Where my responsibilities included:
I can describe myself as a fast learner, with a strong ability to develop, improve and adapt new and/or existing flows. I am a proactive person, who’s always up for new challenges.
particulier.
- Design for testing (DfT) flow where I was focused on implementing a combination of the ATPG compression and Logic Built-in-Self test (LBIST), also generating serial and parallel patterns.
- Physical Design Flow, where I’ve worked with adavanced node going from 65 to 12nm, my responsibilities starts from synthesis with scan insertion, LEC, floor-planning, place & route, and timing/DRC/LVS signoff.
I can describe myself as a fast learner, with a strong ability to develop, improve and adapt new and/or existing flows. I am a proactive person, who’s always up for new challenges.
particulier.
ASIC Physical Design Engineer
Sondrel ltd.
Depuis novembre 2017
CDI
Sala Al Jadida
Maroc
- Project 1: Responsiblities [Synthesis, LEC, floor-planning, place & route, DRC fix, Timing signoff] ; [ASIC : 28 nm, 3M cells, 240 MHz, 8mm2, IoT] ; [Tools : Genus, Innovus, Conformal, Tempus]
- Project 1: Responsiblities [Synthesis, LEC, floor-planning, place & route, DRC fix, Timing signoff] ; [ASIC : 28 nm, 3M cells, 240 MHz, 8mm2, IoT] ; [Tools : Genus, Innovus, Conformal, Tempus]
- Project 2: Responsiblities [logic synthesis (scan insertion included), formality check] ; [ASIC : 12 nm, 1M cells, 3.2 GHz, Network] ; [Tools : Genus, FormalPro]
- Project 2: Responsiblities [logic synthesis (scan insertion included), formality check] ; [ASIC : 12 nm, 1M cells, 3.2 GHz, Network] ; [Tools : Genus, FormalPro]
- Project 3: Responsiblities [Block-level floor-planning, place & route, timing, DRC, and LVS signoff] ; [ASIC : 16 nm, 1M cells, 1.2 GHz, 12mm2, Telecom] ; [Tools : Nitro-SoC, Calibre, PrimeTime]
- Project 3: Responsiblities [Block-level floor-planning, place & route, timing, DRC, and LVS signoff] ; [ASIC : 16 nm, 1M cells, 1.2 GHz, 12mm2, Telecom] ; [Tools : Nitro-SoC, Calibre, PrimeTime]
- Project 4: Responsibilities [Scan chains,Test points, and Logic BIST IP insertion, Patterns generation]; [ASIC : 12 nm, 1M cells, 3.2 GHz, Network] ; [Tools : Tessent]
- Project 4: Responsibilities [Scan chains,Test points, and Logic BIST IP insertion, Patterns generation]; [ASIC : 12 nm, 1M cells, 3.2 GHz, Network] ; [Tools : Tessent]
Engineering Internship - Low Power Physical Design Flow
Mentor Graphics
Mars 2017
à juin 2017
Stage
Salé
Maroc
- Familiar with IC design methodology and state-of-art design tools
- Familiar with IC design methodology and state-of-art design tools
- Implementation of algorithms to analyze the power consumption in
Physical Design, particularly in the placement stage
- Implementation of algorithms to analyze the power consumption in
- Optimizing 11.7% of the dynamic power consumption on nets
- Optimizing 11.7% of the dynamic power consumption on nets
Assistant Engineer Internship
FARSHA SYSTEMS
Juillet 2016
à septembre 2016
Stage
Rabat
Maroc
- Robot prototype movements automation using [Database (MySQL), Web page, Script (Python)]
- Robot prototype movements automation using [Database (MySQL), Web page, Script (Python)]
Training internship
Autonomous Electricity distribution (RAK)
Juillet 2015
- Initiation at the various electrical and electronic stations and equipment: Power transformers HTB / HTA / LV, Electrical distributors, underground and aerial wiring, circuit breakers, etc.
- Initiation at the various electrical and electronic stations and equipment: Power transformers HTB / HTA / LV, Electrical distributors, underground and aerial wiring, circuit breakers, etc.
- Conduct of electrical networks and protective measures, aerial and underground cable connection, detection of anomalies during power cuts, participation in troubleshooting.
- Conduct of electrical networks and protective measures, aerial and underground cable connection, detection of anomalies during power cuts, participation in troubleshooting.
Engineer’s degree - Electronics and Embedded Systems
National School of Applied Sciences (ENSAK)
Depuis septembre 2014
President of the Club "Young Moroccan Leaders" (JLM 2015-2016) for the realization of socio-economic and sustainable development projects. Among the projects carried out:
Member of the Robotics and Renewable Energy Club, I have notably carried out these projects:
- SOLAR Dryer: Solar energy drying system,
- SHAMS: Solar water heater,
- BioGaz: Natural gas digester and organic fertilizers.
Member of the Robotics and Renewable Energy Club, I have notably carried out these projects:
- GeoLoc System: Embedded system for recovering geographic data from a mobile object,
- SEAR: Embedded Road Accident detection system.
Preparatory Classes - Physics and Engineering Science
CPGE Ibn Ghazi - Rabat
Septembre 2012
à juin 2014
Bachelor of Science diploma - Option physics
High schoold "la palmeraie" - Kenitra
Septembre 2011
à juin 2012
With merit
- Python
- TCL
- Unix Shell
- C/C++
- VHDL
- Verilog
- BASH
- Prolog
- Assembleur
-
Innovus
Placement et Routage
-
Nitro-SoC
Placement et Routage
-
Genus
Synthèse logique
-
Design Compiler
Synthèse logique
-
Formalpro
logic equivalence check
-
Conformal
logic equivalence check
-
Tempus
Timing signoff
-
Primetime
Timing signoff
-
Calibre
DRC/LVS
-
QuestaSim
simulation
-
SpyGlass
CDC
-
IMC
Code coverage
-
Tessent
DfT
-
Planning
GANTT
-
Follow-up
SCRUM , Jira
-
Analyze
SWOT
- HTML/CSS
- PHP
- Javascript
- CC
- Ps
- Pinnacle studio
- After Effect CC
- Photography
- Marathon
- Trekking
